your question

What is the difference between in-line inspection and final inspection?

In-line inspection attempts to catch recurring problems before products are even completed. The final check compares the finished shirt to the order standard. The two are not interchangeable.

Examine the mass production approach
01

Sewing is a chain of operations

Collar, cuff, pocket and body parts go through different preparation steps and are assembled in a certain order. Small changes in the model can change the machine, apparatus, processing time or control point.

02

Technical workmanship standard

Seam type, margin, needle-thread compatibility and visible topstitch distance should be described in the technical file. An incidental detail on the sample should not replace the written standard.

  • Collar and cuff symmetry
  • Pocket and front placket placement
  • Arm-body junction
  • Stitch density and tension
  • Buttonhole and button durability
Shirt sewing line and intermediate control
Shirt sewing line and intermediate control
Examine the mass production approach
03

The advantage of inline control

There is more scope for correction if a discrepancy is caught during the relevant operation rather than after it appears in the finished product. The sewing operation where the problem arose and its impact on subsequent pieces are examined. The findings record must keep style and size, inspection point, discrepancy found, corrective action and reinspection result in separate fields.

04

Define your workmanship standard

Erten Tekstil carries out sewing operations in private label shirt production with approved samples and product-specific control points. In the form, you can share the critical workmanship details of your model and the level of quality you expect.

05

Pre-order checklist

flow

Model-specific order of operations

Standard

Stitch and look definitions

Review

Critical inline points

correction

Cause and prevention again

06

How do we approach this issue at Erten?

We examine the cause of differences found during production and check subsequent garments to assess whether the correction has worked.

Guide topic: Erten Tekstil product development, production and quality approach. Production feasibility is assessed separately using the product and order details.

Frequently asked questions about this topic

Is quality control sufficient only at the end of production?

No. Pre-production, in-line and final inspections should be planned together to find critical differences early.

Does every model have the same checklist?

Basic controls may be common; Model-specific collar, pocket, pattern or stitching details are added separately.

Let's see together

Let's talk about your product.

Share critical stitches and measurements in your product; Let's clarify the checkpoints together.

It is not necessary to have all the details ready at the initial consultation.